D321 is a premium, SEMI-GLOSS, extremely durable, waterborne, clear coating.
D321 is a premium, extremely durable, waterborne, clear coating.
Containing both ultraviolet absorbers and hindered amine light stabilizers for the maximum in UV light protection.
ClearFlex™ ME is a fourth generation product formulated to protect digitally produced images that have been applied to flexible vinyl to "pop" color development, waterproof and seal, and to provide ultraviolet light and abrasion resistance.
Our customers, Our biggest value.
Thanks to them we continue to improve our products.
To access the PDF Case Study, simply fill out a short and quick form by clicking the link below:
UV inhibiting--Long lasting
Good abrasion resistance
Chemical resistant to gasoline, oils, diesel fuel, and detergent.
RF weldable
Non-yellowing
Fast dry*, low odor
Flexible
Very resistant to water exposure
Easy water cleanup
Low VOC
DOT nonhazardous
Our customer experienced remarkable benefits using INX HSI.
By switching, they achieved 20% cost savings and superior print quality.
This case study details how HSI inks helped a leading commercial printer enhance their printing capabilities and boost profitability.
Discover the full story and learn how HSI inks can deliver exceptional results for your business.
Experience superior color quality and performance with our expertlyformulated inks tailored to various print configurations. Our process colorsfeature a clean yellow shade and a slightly violet magenta, resulting invibrant colors and unbeatable reds.
COVERAGE: [average]
Theoretical at 1/2 mil DFT: 1010 sqft/gal
Theoretical at 1 mil DFT: 505 sqft/gal
Recommended min. DFT: 1 mil
SURFACE PREPARATION
Clean surface thoroughly of foreign contaminants. Vinyl: apply one or two coats to provide
THINNING:
This is a water soluble product. Thinning is not recommended as it will reduce the effectiveness of the product.
Hand Application:
Use a 1/4 inch close nap roller for the best performance on large surfaces. For small pictorial areas or digital prints, brushing is better using a 4 inch foam brush or foam paint pad.
Always load the applicator with the maximum amount of coating as possible and apply with light pressure. This will prevent bubbling. Vigorous rolling and high pressure may produce a frothy surface.
Spray Application: Do not use Wagner or airless spray equipment. This type of equipment puts too much material on the surface.
Use conventional air atomization equipment. Fluid tip size should be 0.045 - 0.060 at 30 pounds atomizing pressure at 9 - 12 cfm.
Automatic Application:
For automatic application using the Seal AquaSeal 1600 or 3200 series reservoir 3/4 full and 0-10% water to reduce.
Using more water will result in thinner laminate and less protection. Remember, at 10% reduction with one pass
For full protection use D321 unthinned and apply two more coats.
UV PERFORMANCE
Test results show that a one mil (0.001 applied in two applications of 0.5 mil each, blocks >90% transmission of ultraviolet light.
LIMITATIONS: ALWAYS TEST BEFORE USE!
Do not apply to murals that have been applied to walls or any surface that is subject to water absorption or negative hydrostatic pressure. Do not apply
stored in high humid temperatures. This coating may crack or delaminate on high gloss blackout vinyl when the vinyl is aggressively seam sown. Not for use on NON-waterproof paper substrates.
CLEANUP SOLVENT:
Water or MEK (methyl ethyl ketone) for dried spots.
Read more about this product, you will find useful info and technical details about it, as theTemperature exposure and Jetting, Storage conditions, Shelf Life, and more.
